Transferring ILINX Release Configurations When Upgrading

Starting with ILINX Capture v6, the Release configurations are stored within the ILINX database. In ILINX Capture v5x, the ILINX Release configurations were stored in XML files on a disk. ILINX Capture called ILINX Release using a SendAndReceivedReply IXM. The change to store the settings within the ILINX database is very useful for a number of reasons: Release settings are part of the batch profile allowing for simpler migrations between environments, Release is much easier to configure, all configurations are in the database, etc. However, this change can create some extra work when upgrading from ILINX Capture 5x to ILINX Capture 6x. Because of the different architecture, ILINX Release needs to be completely reconfigured for the existing batch profiles. In addition, the Release XML doesn’t change, but there is a shortcut that can be taken. After you have upgraded ILINX Capture to v6, you’ll notice a new IXM in the palette: ILINX_Release_IXM_Icon

The existing ILINX workflow will likely have a SendAndReceiveReply IXM on the map that the 5x version of ILINX Capture used to call ILINX Release. Most likely, it would look like this:
SendAndReceiveReply_IXMTo configure ILINX Release for ILINX Capture 6x, the SendAndReceiveReply IXM will need to be removed from the map and a Release IXM must be dragged onto the workflow map in its place. Once the new Release IXM is on the map, it will need to be configured. This is where the shortcut can be taken. Instead of having to manually enter in the correct URLs, map the metadata values, and configure any other settings, do this:
Configure and save Release with some place holder settings: I normally leave the settings at default and enter in the bare minimum:

  • Job Name
  • User Name
  • Password
  • Batch Profile
  • Release Directory

Once ILINX Release configuration is saved and the workflow map is published, there will be a new entry in the ILINX Capture database Capture WorkflowAppSettings table. The CaptureWorkflowAppSettings.SettingsXML column is where the Release configuration is stored. Now it’s time to update the SettingsXML column with the XML from the ILINX Release 5x job settings file. The Release job should be on the ILINX Release 5.x server at c:\ProgramData\ImageSource\ILINX\Release\Settings\Jobs. The only caveat here is to be sure to place single quotes around the XML content. Here is what the SQL update statement would look like:

update [ILINX CAPTURE DATABASE].[dbo]. [CaptureWorkflowAppSettings]
set SettingsXml = ‘COPY AND PASTE ALL TEXT FROM 5.4 OR PRIOR RELEASE JOB SETTINGS FILE HERE’
where settingsID = ‘APPROIATE ID HERE’

Following this procedure can save some time if upgrading an ILINX Capture 5x system that has a lot of batch profiles. A lot of the time spent on the upgrade could be in the ILINX Release configuration. If I was upgrading a system with only a few batch profiles, I would probably just reconfigure them. If I was upgrading a system with a lot of batch profiles, I would go through the above steps to save some time.

John Linehan
Sr. Systems Engineer
ImageSource, Inc.

Testing, Testing, and More Testing….

You have spent a lot of time and effort to Design and Implement a system for the capture and processing of paper and electronic documents.  You have performed testing to insure the implementation works as designed.  Now comes the intricate part of BETA testing by selected End Users to verify the system works as designed and more importantly, performs the tasks the End Users need.

Continue reading

IBM FileNet P8 Links

Looking for some useful links to information in regards to the installation and configuration of IBM FileNet? We have been deploying successful IBM FileNet implementations and will be providing useful information, as well as, tips and tricks on this blog.

Continue reading

Serendipitous Cerebration – Part Next to Last

One of the last hurtles we were presented with during this project was the ILINX Content Store login screen.

Continue reading

Serendipitous Cerebration (Part 2 – Project Planning)

Serendipitous Cerebration as a problem solving technique can only be applied in the rare cases when normal logical troubleshooting has failed.  As much as we hate to admit it, when all logical problem solving avenues have been exhausted and our troubleshooting prowess to a flummoxed state of tentation, this is when we begin to enter the realm where serendipitous cerebration hides in dark, dank crevasses.  In reviewing this project, our hopes are that you can see how the process of Serendipitous Cerebration can develop.

Continue reading

Installation Hand Off to the Client

As an integrator there are many things we can do as far as making the install a success, but only a very limited amount we can do to guarantee its continuing success. One of the most often seen issues is the handoff of an installation to the client, in particular the maintenance of the database.

Continue reading

Bits and Bytes – Backups!

Today’s topic is short and sweet – Backups!  Backups are worth their weight in gold to an administrator. Even though backups have never been put on a scale, we know they weigh a lot! In the world of Enterprise Content Management, backups have to be attacked from many different angles usually.  System registry, databases, filesystems and more have to be backed up and then integrated back together on a restore, which can be complicated to say the least.

But there is one ECM system that does not require complicated backup strategies: ILINX Content Store!  That’s right – all you do is configure database backups.  No registries—file system is completely optional and in the event of a recovery, a fast reinstall of the server software and a database reattach is all that is required.  Conveniently all the settings, data, and preferences are saved in the database.   Compare that backup strategy to other industry-leading ECM systems and you will see how simple it is.

Mike Peterson
Support Engineer
ImageSource, Inc.