Migrating from Stellent UCM & IBPM – A little foresight can alleviate a lot of trouble

Migrations from systems like IBPM to ILINX can be fraught with issues that can bite the unwary in very bad places. However, if you are aware of such problems, you can plan ways to mitigate them and have a successful migration in the end.

One issue we run into is documents that have a page or two with corrupt images. Perhaps when the page was first contributed to IBPM, a system or other type of issue caused the image to be corrupt or cease to exist. Either physical hardware or a software bug can be the culprit. The product we use for migration, ILINX Export, will flag this document as an error, skip it and move on to the next document in RECID order. Once the export is completed, these flagged documents have to be re-visited. Once a determination is made that an image is indeed corrupt, and the chance to recover it from backups is extremely remote, the document can be deleted or manually exported from IBPM without the corrupt image.

Another matter we’ve dealt with is related to non-tiff images. This category is “universal” type images, and includes PDF, DOC, XLS, MSG and a host of other file types that IBPM supports. There are options within the ILINX Export tool that will allow the export of these files types in their native format through the IBPM SDK. Or the export can be done through database manipulation that can directly access the image file and then “unzip” the universal file into its native format.

The issue that can be encountered here is twofold, and manifests itself when migrating to another repository. One, IBPM stores the native file zipped up with another file that contains metadata and has no file extension. When the document is unzipped there are two files, one with a valid file type and one without. Typically, backend repositories require file extensions, which are useful for performance, like displaying file type icon on the user interface, and a variety of other reasons. During the migration, importing to the backend may be impeded due to a lack of extensions on the metadata files. Secondly, if the extension of the universal file has been altered or damaged in storage, the file type may not be a standard that the new repository will accept. In any case, having your migration come to a screeching halt is something to avoid.

Awareness is the key. By proactively incorporating a response into your migration plan, you can eliminate much heartburn and anxiety. That is where the expertise and knowledge of a seasoned Optika / Stellent / Oracle integrator, like ImageSource, comes into play. We have helped many customers build migration plans that take these and other items into account, so the migrations are as smooth and worry-free as possible.

Oracle IPM 10g and Imaging 11g Migration: Part 2

A couple weeks ago I wrote a post about ECM migrations, with a focus specifically on moving content from Oracle IPM/Imaging to other destination systems—projects we’ve been performing a lot of lately. Our tools of choice for migrations are ILINX Export and ILINX Import, but if the destination ECM system isn’t supported by ILINX Import, there are other options. Almost every ECM system has mechanisms to do bulk or mass imports. ILINX Export provides many options to format the data so sometimes it is a matter of configuring the output to be in a format supported by the third party import application. Other times, utilizing these third party import applications may require a little development. Regardless of what’s necessary, we’ve never run into a destination system that we couldn’t work with.

There are multiple reasons we split the migration operations into two parts—export and import—flexibility being the biggest one. There are a lot more options when splitting the migration into two separate operations. Since we don’t modify the data on export from the source system, a snapshot can be taken for long term archival. Then on import, or pre-import, we can massage the data, perform file conversions, or augment the data by pulling additional data from an external source. Even though we split the migration up into two operations, they can be run in tandem so there is little effect on the overall duration of the migration.

One of the biggest concerns surrounding these migrations is the amount of time it will take. Performing tests in the actual environment is required because of how many variables go into the throughput of a migration. If the migration is estimated to take too long after initial testing, there are options to address that scenario, including:

  • Create a migration environment with instances of the source ECM system software on newer, more powerful servers, and restore the production data to these new servers in order to execute the migration from there. This has the additional benefit of removing any potential performance impact to the legacy production system for the duration of the migration.
  • Spin up additional instances of ILINX Export and/or ILNX Import to increase throughput. There will be a point when additional instances of the export or import process will not increase throughput—generally when a bottleneck restricts the maximum throughput that the source or destination system can achieve.

Recently, I had a customer that had set a hard go-live date that was just 60 days after project initiation for their new system. We had no problem meeting this requirement from a technology deployment standpoint, but our migration testing indicated that we wouldn’t be able to move all of their 25+ million documents in that time frame. In order to make the new system go-live date, we migrated the three previous years’ content first, then resumed with the older, remaining content. Since the vast majority of content to be retrieved would be from the previous year, the fact that the migration wasn’t 100% complete at go-live was a non-issue. This is an approach we’ve followed numerous times.

Once a migration is in full swing, auditing can be the most time consuming part of the process. ILINX Export and ILINX Import have very complete auditing capabilities, so while the migration is occurring, issues are immediately identified and can be addressed. We generally audit a couple different ways to confirm success. If only using ILINX Export, what is exported can be compared with what is in the source system to ensure all content was pulled out. When performing a complete migration, what is imported into the destination system is compared with the source system. Any migration can only be considered a success when it is proven that all the content was migrated, which is why we practice multi-step auditing during the migration.

By following our standard methodology for migrations and utilizing the technology we’ve developed over the years, we consistently perform reliably successful migrations. To read more about migrations, review my previous blog posts Oracle IPM 10g and Imaging 11g Migration and Steps for a successful ECM migration using ILINX Export.

If you have any questions about my blogs, or would like to discuss the possibilities for migration within your organization, please reach out to me or your contact at ImageSource to start the conversation.

John Linehan
Sr. Systems Engineer
ImageSource, Inc.

Transferring ILINX Release Configurations When Upgrading

Starting with ILINX Capture v6, the Release configurations are stored within the ILINX database. In ILINX Capture v5x, the ILINX Release configurations were stored in XML files on a disk. ILINX Capture called ILINX Release using a SendAndReceivedReply IXM. The change to store the settings within the ILINX database is very useful for a number of reasons: Release settings are part of the batch profile allowing for simpler migrations between environments, Release is much easier to configure, all configurations are in the database, etc. However, this change can create some extra work when upgrading from ILINX Capture 5x to ILINX Capture 6x. Because of the different architecture, ILINX Release needs to be completely reconfigured for the existing batch profiles. In addition, the Release XML doesn’t change, but there is a shortcut that can be taken. After you have upgraded ILINX Capture to v6, you’ll notice a new IXM in the palette: ILINX_Release_IXM_Icon

The existing ILINX workflow will likely have a SendAndReceiveReply IXM on the map that the 5x version of ILINX Capture used to call ILINX Release. Most likely, it would look like this:
SendAndReceiveReply_IXMTo configure ILINX Release for ILINX Capture 6x, the SendAndReceiveReply IXM will need to be removed from the map and a Release IXM must be dragged onto the workflow map in its place. Once the new Release IXM is on the map, it will need to be configured. This is where the shortcut can be taken. Instead of having to manually enter in the correct URLs, map the metadata values, and configure any other settings, do this:
Configure and save Release with some place holder settings: I normally leave the settings at default and enter in the bare minimum:

  • Job Name
  • User Name
  • Password
  • Batch Profile
  • Release Directory

Once ILINX Release configuration is saved and the workflow map is published, there will be a new entry in the ILINX Capture database Capture WorkflowAppSettings table. The CaptureWorkflowAppSettings.SettingsXML column is where the Release configuration is stored. Now it’s time to update the SettingsXML column with the XML from the ILINX Release 5x job settings file. The Release job should be on the ILINX Release 5.x server at c:\ProgramData\ImageSource\ILINX\Release\Settings\Jobs. The only caveat here is to be sure to place single quotes around the XML content. Here is what the SQL update statement would look like:

update [ILINX CAPTURE DATABASE].[dbo]. [CaptureWorkflowAppSettings]
set SettingsXml = ‘COPY AND PASTE ALL TEXT FROM 5.4 OR PRIOR RELEASE JOB SETTINGS FILE HERE’
where settingsID = ‘APPROIATE ID HERE’

Following this procedure can save some time if upgrading an ILINX Capture 5x system that has a lot of batch profiles. A lot of the time spent on the upgrade could be in the ILINX Release configuration. If I was upgrading a system with only a few batch profiles, I would probably just reconfigure them. If I was upgrading a system with a lot of batch profiles, I would go through the above steps to save some time.

John Linehan
Sr. Systems Engineer
ImageSource, Inc.

How to troubleshoot SQL error [3566] & open applications in Kofax 10

I recently worked with a customer who was receiving the error below on a Client/Server installation with a standalone SQL instance (not built-in):

[3566] KdoLib: Network I/O error: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (Provider: SQL Network Interfaces, error: 26 – Error Locating Server/Instance Specified) (-1)

After performing a clean install of Kofax 10 on a new workstation, they were unable to open Batch Manager, Administration, etc. The process could be seen in Task Manager, but the window would not open, and after about 20 minutes would show the error above.

To resolve this we first tested the connection to the SQL server using a .udl file. This can be done by creating a blank text file, then renaming the extension to .udl.

Open this new Data Link and fill in the fields for your SQL server and test the connection. If you do not get a success, verify that your server name, login, firewall, etc. are configured properly to access the server. Continue reading

Steps for a successful ECM migration using ILINX Export

As a Sr. Systems Engineer at ImageSource, I am currently engaged on a project where the customer had a need to migrate all content out of their Stellent IBPM 7.6.0.0 software platform. (This is the same product stack as Optika Acorde and Oracle IPM; the product has gone through a few name changes over the years with the different acquisitions.) In my experience, I have found there are several steps that need to be taken when considering migrating content from your current ECM repository.

The first steps in any migration are to analyze existing content and ensure that the majority has been discovered, identified and prioritized.

  1. Categorize content into categories (document types, applications, folders, etc.)
  2. Prioritize content based on:
    1. A business value rating to the content
    2. A difficulty level associated with the migration effort

Categorizing Content:
All discovered content should be cataloged by the indexes or field data that exists for it and the file formats used. All systems that may be migrated need to be investigated for existing export tools that can export data into various formats, such as CSV or directly to custom databases. If the system is lacking any direct export capability built into the product it is necessary to either develop a migration tool or purchase one. In my current project we are using a tool developed by ImageSource called ILINX Export. ILINX Export supports migrations out of Oracle IPM (along with Stellent IBPM and Optika Acorde), WebCenter Content 11g, EMC AppXtender, IBM FileNet P8, and IBM FileNet ImageServices. Continue reading

How to fix an error when configuring Active Directory Federation Services

While recently working to deploy an Active Directory Federation Services (ADFS) instance on a Server 2012 system, I ran into an issue. When I tried to do the initial configuration of the ADFS service from the ADFS console, there was an error that said the Windows Internal Database (WID) could not be started. This WID service is required for the ADFS service to function. I have included the text from the error below, which is very simple to fix once you know the root cause. Continue reading

Converting Image Files

At some point there is going to be a need to convert an Imaging Systems image files from one format to another format when moving to a new Imaging system.  ILINX® Import can be used to handle the conversion.

Continue reading